PLEASE ORDER TRANSFERS SEPARATELY FROM FABRIC PREORDERS AND RETAIL.
IMPORTANT: The responsibility of the application process of these transfers lies with the customer. We are not be liable for any issues that may arise during and after the application process so please take your time and follow the instructions below.
Sizes:
Infant 4" (max width OR height)
Child 7.5" (max width OR height)
Adult 10.5" (max width OR height)
DTF transfers are for clothing or fabric. Cotton or poly or poly blends. They can be used on any color material.
Instructions: A heat press is required for these transfers. While a handpress or iron will work we recommend an actual heat press for the smoothest quality because they need the correct heat and pressure to adhere properly
Cotton: Pre-press at 315F for 5 seconds, place design on fabric color side up, then press using heavy pressure at 315F for 10-12 seconds. Allow product to set, and peel when cold. Cover with parchment paper and press again (after peeling) at 315F for 10 seconds.
Poly & Poly Blend: Pre-press at 290F for 5 seconds, place design on fabric color side up, then press using heavy pressure at 290F for 10 seconds. Allow product to set, and peel when cold. Cover with parchment paper and press again (after peeling) at 290F for 5-8 seconds.
UV Transfers work on wood, metal, glass, ceramics, etc. They are waterproof, weatherproof, but we do not recommend using in a dishwasher or microwave.
Instructions: Start by cleaning the surface where you plan to apply the decal. Use a lint free cloth and rubbing alcohol to remove any dirt & oil. Allow item to dry before applying. Gently peel off the backing, be careful not to touch the adhesive side of the decal it can leave fingerprints on the transfer. Carefully position the sticker on the surface- please note: the adhesive is strong and permanent, so once its placed, it cannot be removed. Start pressing the transfer onto the glass and smoothing out any bubbles or wrinkles as you go. You can simply use your hands or a small squeegee. Take your time to work the decal onto the surface starting from the center of the decal and working out to the edges. After firmly rubbing the design onto the surface, slowly start to peel the clear carrier film.